Barcus-berry 1320 User Manual

~1320~Piezo Violin BridgeWITH BUILT-IN PIEZO PICKUP

Made in the U.S.A.This Barcus-Berry product is manufactured in theUnited States. It is designed to satisfy the most rigorous demands of the profession

Limited WarrantyThis Barcus-Berry product is warranted for a period of one (1) year from the date of purchaseagainst defects in workmanship and parts.

Congratulations on the purchase of your Barcus-Berry 1320violin transducer bridge with piezo transducer.The 1320 is a select-quality, unfitted replace

OperationFor optimum performance, the sensor employed in theModel 1320 transducer bridge must interface with an inputhaving an impedance of at least o

Important: Before you begin, please check the contents with-in this box to insure that included are:1. Barcus-Berry violin transducer bridge with buil

4. Installation Instructions for Model 1320If any of these items are found to be damaged ormissing, immediately contact the Barcus-Berrydealer from wh

Installation:To install the Model 1320 transducer bridge,shape and fit the bridge to the instrument in theusual manner with the embedded-transducer si

To mount the output jack on your instrument tailpiece, remove the screws from the clampassembly and place the U-shaped memberbeneath the tailpiece. Po

Special Note: Over a period of time, violinbridges generally tend to deviate from an uprightposition and lean forward toward the fingerboard.If allowe

however, when adjusting the bridge. It isrecommended that string tension be slightlyrelieved before any attempt at repositioning isundertaken.